Difference between revisions of "Settings"

Revision as of 15:17, 18 July 2022

UWP/WinX/Xamarin
Android

UWP/WinX/Xamarin

There are several categories of settings, each providing a group of configurable options for (a) specific feature(s).

General

This initial section in the Profile description contains some general settings.

Name	Purpose
AutoBranchSync	Denotes whether the automatic branch download below an object will be synchronized automatically or not. It is set to "false" by default.
AutoBranchSyncPeriod	Denotes the period for automatic branch synchronization in minutes. Its value is set to "0" by default, when the AutoBranchSync is set to false. Otherwise it should take an other figure.
BranchDownloadSubLevels	Determines how a branch download is performed. If not configured (equals to 0 by default), an entire branch is downloaded in one attempt. If set to 1 for example, the 1st level children of the selected root is first analyzed, then sub branch downloads are performed for each of the children. Basically the higher the number, the more "fragmented" the branch download becomes. This usually increases the overall download time, but can be helpful for scenarios like really large branches or unstable networks since it has a better chance of finishing smaller individual downloads.
Customizing	Denote your specific folder for XAMLs that depict how the Content is displayed, here. If, by default, the value is set to i:nil=true, then the specific XAML folder is denoted by the name of the Profile at the bottom of the Profile Description.
UICompatibilityLevel	Determines which UI versions the client app should try to be compatible with. In major version updates, UI redesigns can happen and sometimes old UI components might even be completely removed. For example, the app bars are removed since (level 400) because their features are embedded into other parts of the new UI. For those who want to stick with the previous UI for a while, this setting just needs to set to a level earlier, e.g. 380.
ExpertMode	This boolean field denotes whether the Metadefinitions are loaded whenever the Profile of the App is loaded anew or not. By default the value is set to false, i.e. the Metadefinitions are only loaded when the Application is initialized the first time, or when all data has been purged.
ShowUnreleasedFeatures	This boolean field denotes whether some unofficially released features/options should be enabled/shown. For example, the developer settings in the Xamarin app is hidden by default and only shown when this value is set true.

The UICompatibilityLevel setting tells the client app to be compatible to the specified versions of the UI if possible. This doesn't mean all existing UI customizings are still supported in newer versions of the app. In fact, any feature where this setting has an effect will explicitly mention it. Otherwise, you should always check the "XAML Notes" tab of each version's release note page.

Connection

This section contains properties to denote the internal connection settings of the App.

Name	Purpose
Application	Denotes the name of the Application that will be run, e.g. one could use YourApp as the name for an Application.
AuthenticationPort	Denotes the Port used on the Authentication Server. Default values might be: 443; 777; 888;
AuthenticationProtocol	Denotes which Transfer Protocol for Authentication might be used. By default https is used.
AuthenticationServer	Denotes the Authentication Server, e.g. your.auth-server.net could be used.
AuthenticationService	Denotes the path on the Authentication Server to the Authentication Service File, e.g. the path might be YourFolder/YourApp/USAM/USAM.svc. In this case the User System Authentication Manager (USAM) is used.
AuthenticationServiceConfig	WSHttpBinding (the default value) or BasicHttpBinding. It should be set according to the webservice configuration.
ConnectionTimeOut	Denotes the time in seconds when a web service call is dropped by the app. It's necessary so that the app doesn't wait indefinitely in events such as connection lost. The default value is 300 seconds. If you know your individual web service calls will take longer, the value should be increased accordingly.
ContentPort	Denotes the Port used on the Content Server. Default values might be: 443; 777; 888; Often it is the same port as for the one for the Authentication Server.
ContentProtocol	Denotes which Transfer Protocol for the Content might be used. By default https is used.
ContentServer	Denotes the Content Server, e.g. your.content-server.net could be used. Could be the same server as the Authentication Server.
ContentService	Denotes the path on the Content Server to the Content Service File, e.g. the path might be YourFolder/YourApp/CONTENT/UBIKContent.svc. Make sure that the path points to the UBIKContent.svc file.
ContentServiceConfig	WSHttpBinding (the default value) or BasicHttpBinding. It should be set according to the webservice configuration.
Context	Denotes the name of the Context, e.g. CXT_YourApp_001. This context is specified inside UBIK and all the different Metadefintions are loaded from it.
SignalingServer	Denotes the Server for Remote Support.
SyncMode	Denotes the Synchronization Mode of the Application. Possible Values are: Online, Offline, Auto; by default the SyncMode is set to Online.

Content

These internal content settings control the behaviors and activities of the content data.

Name	Purpose
AutoSaveMode	If this boolean field is set true changed Objects will be saved automatically when users leave the relevant pages. Otherwise, the User will see a save button and be asked to save the changes when leaving the relevant pages.
ChildPageChildrenPortion	Denotes the Portion of the visible Content Page Area that is split between the Children of an Object and its Properties. Usually the value is between 0 and 100. By default it is normally set to 67, i.e. taking two thirds of the Content Page Area to display Children of a given Object.
ChildPagePropertyPortion	Denotes the Portion of the visible Content Page Area that is split between the Properties of an Object and its Children . Usually the value is between 0 and 100. By default it is normally set to 33, i. e. taking one third of the Content Page Area to display Properties of a given Object.
DetailsPageChildrenPortion	Denotes the Portion of the visible Details Page Area that is split between the Children of an Object and its Properties. Usually the value is between 0 and 100. By default it is normally set to 67, i.e. taking two thirds of the Details Page Area to display Children of a given Object.
DetailsPagePropertyPortion	Denotes the Portion of the visible Details Page Area that is split between the Properties of an Object and its Children . Usually the value is between 0 and 100. By default it is normally set to 33, i. e. taking one third of the Details Page Area to display Properties of a given Object.
DocumentInternalMode	Denotes whether a Document is truly displayed only inside of the Application, then the boolean field should be set to true. If there should be a preview of the Document available inside the Application only and the Document is to be opened by an external Application, the boolean field should be set to false. By default the field is set to false.
DocumentPageChildrenPortion	Denotes the Portion of the visible Document Page Area that is split between a Document lying beneath an Object and its Properties. Usually the value is between 0 and 100. By default it is normally set to 80, i.e. taking 80% of the Document Page Area to display a Document connected to a given Object.
DocumentPagePropertyPortion	Denotes the Portion of the visible Document Page Area that is split between the Properties of an Object and a Document belonging to it . Usually the value is between 0 and 100. By default it is normally set to 20, i. e. taking 20% of the Document Page Area to display Properties of a Document belonging to a given Object.
DocumentPagePropertyWidth	Denotes the maximum width (in pixels) that Properties of a Document can take when a Document belonging to an Object is displayed. By default the value is 300 px.
EnableSyncLogging	Denotes whether a logging of different events, e.g. loading an object, changing a Property on an Object, etc. should take place. By default this boolean field is set to true.
EnableAutoBranchDownload	Denotes whether auto branch download should be allowed. By default this boolean field is set to 'false.
GeoDistanceSorting	Denotes whether the Children of an Object should be displayed in a ranking of geographic distance to the Parent Object. By default this boolean field is set ti true.
NextLevelClassificationPreload	When set to false, provides the possibility to override the effect of SYSCLS PRELOAD CHILDREN, namely to prevent the preload. See the link for more details.
PriorityThreshold	Any property with a priority number greater than this integer setting value is regarded as a high priority property and is highlighted when being displayed
Update Expiry	Determines how long (in seconds) freshly updated content becomes outdated and will be updated again when the user browses to it.
Content Logging	Determines whether certain content related activities should be recorded as log files.

Push

These internal push settings control the behaviors and activities of pushed data. For general information see UBIK^® Push Service.

Name	Purpose
ActivatePush	This boolean field denotes whether new resp. changed data should be pushed to other clients, which might be running the Application at the same time, or not.
PushPollingIntervalSeconds	Denotes the interval in seconds for the client to retrieve newly pushed data from the server.
PushPort	Denotes the Port Number to use when connecting to the Push Server (optional), might be set to the same Port number as the Content Port Number.
PushProtocol	Denotes which Transfer Protocol for the Push might be used. By default https is used.
PushServer	Denotes the Push Server, e.g. your.push-server.net could be used. Could be the same server as the Content Server.
PushService	Denotes the path on the Push Server to the Push Service File, e.g. the path might be YourFolder/YourApp/PUSH/UBIKPush.svc. Make sure that the path points to the UBIKPush.svc file.
ShowPushMessage	This boolean field denotes whether the User is informed about an occurring Push, or not. By default it is set to false.

Scan

These internal scan settings control the behaviors and activities of scanned data.

Name	Purpose
CurrentBarcodeFormats	Refers to a Microsoft definition for QR Codes, denoted in [1]
CurrentOCRProfileIndex	Specifies a certain OCR Profile. Yet, in the client in the camera settings you can also specify the OCR Profile.
PostProcessRegex	If this field is set to true, you can specify how a text based Code has to look like in the client settings.
ScanARMarker	This boolean field denotes whether an ARMarker can be scanned and will be recognized.
ScanCodes	This boolean field denotes whether 2D-Codes, e.g. Barcode, QRCode, etc. can be scanned and will be recognized.
ScanOCR	This boolean field denotes whether an OCRMarker can be scanned and will be recognized.
UnlockByScanTimeOut	This numeric field denotes whether a normally locked object can be unlocked for changes for a certain amount of time (in seconds).
CodesTryInverted	This boolean field denotes whether the client should try to scan color inverted 2D codes. The default value is "false".

Session

These internal session settings control the behaviors and activities of a session.

Name	Purpose
AlternativeViewMode	By default this boolean field is set to false. If set true, it denotes that there is more than one View mode available.
ZoomedInMode	If this boolean flag is set true, the Children of an Object are shown as Tiles. Otherwise they are shown as List items.

Final Settings

These final settings control the behaviors and activities of a profile.

Name	Purpose
IsFavorite	This boolean field denotes whether the Profile will be shown as a favourite on top of a list when there are also other Profiles in the Application client available.
LastUsed	Contains a Timestamp when this profile was used the last time.
MultiUserMode	When set to false, UBIK^® can only remember a single user per profile and will automatically log that user in when a profile is selected. When set to true, the credential remembering feature becomes unavailable. However, this is no longer relevant because the new version(s) can remember multiple users per profile.
Name	This field denotes the name of the Profile. It also determines the name of the subfolder containing XAML customizing files, if the value of the Customizing field is set to i:nil=true, as well as the name of the subfolder containing database files, if the value of the Project field is set to i:nil=true.
Customizing	This field determines the name of the subfolder containing XAML customizing files. It might be common to have to carry the same name as the Name field. If it is unspecified (i:nil=true), the value of Name will be used as subfolder name.
Project	This field can name a special project. It determines the name of the subfolder containing database files. It might be common to have to carry the same name as the Name field. If it is unspecified (i:nil=true), the value of Name will be used as subfolder name.
ShowHiddenSettings	By default this boolean field is set to false, i.e. no hidden settings are shown.

Augmented Reality

Maps

These settings control the behaviors of the map throughout the app.

Name	Purpose
Map Type	Determines which base map image will be used in the map.
Default Zoom Level	Controls how closely zoomed in the map should be whenever it is shown.

Video

Name	Purpose
Camera Device	Specifies which camera to use in the app.
Camera Resolution	Specifies which camera resolution to use in the app.

The camera preview window in the settings is hidden when the camera is currently in use in e.g. the POI view or the scan view. However, a user can still change the relevant settings and see the immediate results.

Location

Name	Purpose
Calibration Heading	Specifies the heading that is used when manually calibrating the orientation sensor.
Location Mode	Specifies the Location Mode.
Use PoseFusion	Specifies whether PoseFusion is used or not.

Android

Settings list provides a list of all the settings that control the client environment, giving the user the possibility to display and configure these settings. The settings are ordered according to theme, the part of environment it's responsible for controlling. Within each theme the settings are sorted alphabetically. Mandatory settings are indicated with a * next to the name.

Available settings

All users have at least access to all settings statet in List of settings. Additional settings, namely the AR settings or Demo settings are only available if the regarding plugin is part of the application built.

List of settings

The basic stock of settings includes:

Name	Purpose
AuthServerName	The name of the server to connect to for user authentication
AuthPortNumber	The port number to use when connecting to the authentication server (optional)
AuthProtocol	The protocol to use for authentication over the Internet (e.g.: HTTPS).
UBIKAuthContentService	The name of the UBIK authentication service
MemoryUsage	Whether UBIK^® should lazy load or eager load all the content.
Protocol	The protocol to use for data communication over the Internet (e.g.: HTTPS)
PortNumber	The port number to use when connecting to the content server (optional)
PriorityThreshold	Any property with a priority number greater than this integer setting value is regarded as a high priority property and is highlighted when being displayed
UpdateExpirySeconds	The number of seconds one has to wait before the same update will be considered necessary. If an update of certain content has just ended successfully and is requested again within the amount of time configured in this setting, the client simply dismisses the new request. However, this setting does not affect Forced Updates in Manual Synchronization Mode.
SyncMode	The possible values are Automatic, Manual Commit and Offline. For more details, please refer to Sync Mode.
ShowSystemProperties	If set to true, all properties will be displayed; otherwise, only the ones that are marked as visible.
UBIKContextName	The UBIK^® CONTEXT name
UBIKApplicationName	The UBIK^® APPLICATION name
UBIKContentService	The name of the UBIK^® content service
ServerName	The name of the server to connect to for fetching content
ExpectSingleSearchResult	If checked, single search results will be displayed in the ContentBrowser immediately instead of being shown in the result list. Available since Version 2.5.0 - Android

AR settings

The AR plugin has additional settings:

Name	Purpose
CompassOffsetDegrees	The offset in degrees to change the magnetic north and therefore the orientation of the device (global setting).
Pose Estimation Systems	The different pose estimation systems considered in the Location Manager can be activated or deactivated with this setting.
SpatialiteDbPath	The path to the sqlite database containing the routing graph. It will be looked for on the public internal storage (Google calls that the "Primary External Storage"), which is NOT the SD-card.
StandardMapZoomLevel	Specifies the zoom level, which should be applied when using the zoom features of the Map View.
DefaultMapZoomLocation	Specifies the position, which should be zoomed to when opening the Map View after login.
ContentDistanceFilterThreshold	The threshold in meters up to which billboards are displayed in Augmented Reality activities; also influences the scaling of billboards depending on their distance.
NFC Scan Result Type	Specifies the type of information, which should be extracted from scanned RFID tags.

Demo settings

Additionally, the demo application and its unique user specific settings are listed as follows

Name	Purpose
NumberPropertyEditor	Whether to use the normal keyboard or the UBIK Number Pickers for editing numeric properties
CurrentAltitude	The (mock) altitude in meters to use in Augmented Reality activities, for non-manual locations (e.g. GPS, since the altutide for this is too inaccurate)
AltitudeOffset	The offset in meters to add to the current altitude in Augmented Reality activities (used for configuration of the device height)
ContentDistanceFilterThreshold	The threshold in meters up to which billboards are displayed in Augmented Reality activities
SupportIntentTarget	The actual Uri / Activity class / app package to be opened as an Android intent when the support action is triggered.
SupportIntentType	The type of the target (URI/APP_PACKAGE/ACTIVITY_CLASS) to be opened as an Android intent when the support action is triggered.

Characteristics of settings

Settings have the following characteristics and behavior within the application:

Available and editable before and after the login.
Changes done before login are applied to the next user who attempts to login.
- This goes for applying presets as well.
- After applying a preset, changes of settings are also applied.
- The settings defined are not just used by the user as new settings configuration, but are merged with the settings the user already has, and are overriding them.
Changes after login are saved for the user currently logged in. After logout and new login, they are restored, merged with the settings changed before login if there are some and finally they get applied to the user.
If a completely new user attempts to login without defining settings before or loading a preset, the default values of the settings as defined for the respective app are used.

PreSet actions

Load PreSets

The Load PreSet button can be used to Load Presets onto the settings.

Save PreSets

The Save PreSet button that is only available after login, can be used to Save Settings as Presets.

@@ Line 189: / Line 189: @@
 |''Name'' || This field denotes the name of the Profile. It also determines the name of the subfolder containing XAML customizing files, if the value of the ''Customizing'' field is set to ''i:nil=true'', as well as the name of the subfolder containing database files, if the value of the ''Project'' field is set to ''i:nil=true''.
 |-
-|''Customizing'' || This field determines the name of the subfolder containing XAML customizing files. It might be common to have to carry the same name as the ''Name'' field. Carrying the value ''i:nil=true'' means that the value of the ''Customizing'' field will be set to the value of the ''Name'' field.
+|''Customizing'' || This field determines the name of the subfolder containing XAML customizing files. It might be common to have to carry the same name as the ''Name'' field. If it is unspecified (''i:nil=true''), the value of ''Name'' will be used as subfolder name.
 |-
-|''Project'' || This field can name a special project. It determines the name of the subfolder containing database files. It might be common to have to carry the same name as the ''Name'' field. Carrying the value ''i:nil=true'' means that the value of the ''Project'' field will be set to the value of the ''Name'' field.
+|''Project'' || This field can name a special project. It determines the name of the subfolder containing database files. It might be common to have to carry the same name as the ''Name'' field. If it is unspecified (''i:nil=true''), the value of ''Name'' will be used as subfolder name.
 |-
 |''ShowHiddenSettings'' || By default this boolean field is set to ''false'', i.e. no hidden settings are shown.