AR-Marker Device Pose Estimation
Revision as of 11:39, 19 September 2017 by CHI (Talk | contribs) (Created page with "If marked with the SYSCLS ARMARKER GEO classification, AR-Markers can be used for calculating the device pose once they are detected in the POI-View (see AR...")
If marked with the SYSCLS ARMARKER GEO classification, AR-Markers can be used for calculating the device pose once they are detected in the POI-View (see AR-Marker). Keep in mind that the AR-Marker has to be configured properly (i.e. configuration has to correlate with the physical pose of the AR-Marker) and the camera of the mobile device has to be calibrated (see Camera Calibration).
Characteristics
• Provides position and orientation in world coordinate system.
• Maximum pose errors of 0,1m in position and 2° in orientation estimation.
• Low standard deviation, jitter is hardly noticeable.
• The pose can be updated with roughly 10Hz, depending on the computa-tional capacities of the mobile device.
• Pose estimation is not possible if AR-Markers are not within the field of view of the mobile device´s camera.
• Requires manual installation effort.
• Requires a calibrated camera.
