Difference between revisions of "POI View"

Revision as of 07:35, 7 May 2015

POI view is the Augmented Reality view that displays Points of Interest (POI's) related to the current location of the mobile device.

Visualization

A typical POI view consists of a real time camera view, a radar view and a few billboards.

Radar view

At the top right corner of the POI view, there is a circle shaped radar view which displays all the POI's as yellow dots. The positions of these POI's relative to the device are reflected and constantly updated in the radar view. If a billboard is currently selected (the last one touched), its dot in the radar view is marked with red color. POI groups are also represented as billboards in the radar view.

Billboard

Billboards are visual representations of POI's. A billboard consists of the following:

Icon;
Description text;
Name text;
Text of distance to the current location;
Background color representing the status of the POI.

All these visual elements are updated when either the content or the current location changes.

POI view
Selected POI in radar
Colorized Billboard

Only Geo content are displayed as billboards. In addition:

An object no longer has to be in the infrastructure in order to be shown;

This was not the case before Version 2.4.3 - Android

If a POI group is currently open/active, objects that are shown are:
- POI group items that belong to the current group;
- Objects that are not POI group items.

Interaction

Interacting with billboards

When a user touches a billboard, a dialog for that particular POI will show up.

Scanning LLA markers

Under certain circumstances, users might want to specify a manual location instead of using the current location detected by their devices. This can be achieved by scanning an LLA marker in the POI view.

LLA only mode button

Button to Activate LLA Only Mode

Button to Deactivate LLA Only Mode

(Available since Version 2.4.1 - Android )

Sometimes, it is necessary to temporarily turn on LLA only mode. For example, once the users enter a building where GPS or other locating systems are not reliable enough, they could, however, use the on-site LLA markers to precisely locate themselves. Afterwards, the LLA only mode can be turned off so that the users can continue to use the locating systems outside the building. UBIK^® provides a LLA only mode button in the POI view for scenarios like this.

When LLA only mode is inactive, there should be a toggle button in the POI view:

A single click on it would switch UBIK^® from the current positioning mode to LLA only mode (PositioningMode set to LLA_ONLY_MODE);
Another click from LLA only mode to the previous mode.

Since Version 2.4.3 - Android , the LLA only button is also shown when LLA_MODE was active initially.

When LLA only mode is active, UBIK^® ignores all other location updates except the ones from scanning LLA markers.

During LLA only mode, UBIK^® stops most of its location services. However, services such as GPS require a long initializing time before they can be used. Considering the fact that LLA only mode is often switched on and off for a short period of time, UBIK^® keeps such services on "standby" for a while so that the mode switching is smooth and instantaneous.

@@ Line 26: / Line 26: @@
 Only [[SYSCLS_GEO|Geo content]] are displayed as billboards. In addition:
 * An object no longer has to be in the infrastructure in order to be shown;
-{{Hint|This was not the case before {{VersionAndroid|2.4.3}}}}
+{{Hint|This was not the case before {{Version/Android|2.4.3}}}}
 * If a [[HowTo:Use_POI_Groups|POI group]] is currently open/active, objects that are shown are:
 ** [[SYSCLS_POIGROUPITEM|POI group items]] that belong to the current group;
@@ Line 44: / Line 44: @@
 [[File:UI_Android_LLA_Only_Button_Activate.jpg|thumb|alt=Button to Activate LLA Only Mode|Button to Activate LLA Only Mode]]
 [[File:UI_Android_LLA_Only_Button_Deactivate.jpg|thumb|alt=Button to Deactivate LLA Only Mode|Button to Deactivate LLA Only Mode]]
-(Available since {{VersionAndroid|2.4.1}})
+(Available since {{Version/Android|2.4.1}})
 Sometimes, it is necessary to temporarily turn on [[Location_Manager#Possible_positioning_modes|LLA only mode]]. For example, once the users enter a building where GPS or other locating systems are not reliable enough, they could, however, use the on-site LLA markers to precisely locate themselves. Afterwards, the LLA only mode can be turned off so that the users can continue to use the locating systems outside the building. {{UBIK}} provides a '''LLA only mode button''' in the POI view for scenarios like this.
@@ Line 51: / Line 51: @@
 * A single click on it would switch {{UBIK}} from the current [[Location_Manager#Possible_positioning_modes|positioning mode]] to LLA only mode (PositioningMode set to LLA_ONLY_MODE);
 * Another click from LLA only mode to the previous mode.
-Since {{VersionAndroid|2.4.3}}, the LLA only button is also shown when LLA_MODE was active initially.
+Since {{Version/Android|2.4.3}}, the LLA only button is also shown when LLA_MODE was active initially.
 When '''LLA only mode''' is '''active''', {{UBIK}} ignores all other location updates except the ones from [[#Scanning LLA markers|scanning LLA markers]].