XAML Best practices

A basic rule is that more code = more to compile, and this can decrease the performance of your whole application. To counter that, always attempt to reduce the amount of xaml customizing, especially if you find yourself repeating specific controls and attributes.

Understanding Templating in UBIK

The most critical thing to understand about customizing your UI is that templates for the entire default UI are already present in the client’s core. Customizing templates allow us to modify of specific areas of the UI by overwriting the parts of the default UI with the same name. Therefore, only the specific xamls that need to be customized should be added. This is recommended for many reasons;

• Custom xamls will ‘undo’ improvements to the UI coming from newer versions of the client, when they are based on xaml files from an older version of UBIK. For custom UIs there is no way around it, but this is why uncustomized copies of xamls should never be added to the project folder. To remove a customizing, simply delete that file. There is no need to replace it with an uncustomized version from the default folder.
• Less xaml files to parse means better performance.
• More xamls also makes it more difficult for others to read and understand the customizing. This also makes it much more difficult to find and diagnose errors when requesting support. It also generally increases the effort required to maintain the xamls.

Check out the next section for a more in-depth look into Content Templating.

Best Practices

• 🏆 Deploy a new Default folder every time you update your client version, to ensure that the latest UI version is the foundation for your customizing.
• 🏆 Only include xamls that are needed for your customizing.
  • Remove files for child Areas and Items that are not included in this project.

How to select the right Control

Controls often have similar functionality, making it difficult to decide which to use, making the question of which control to use highly ambiguous. For clarity, a 'Control' refers to a single xaml object that can be added to your visual tree. These range in scope and purpose, from layouting (such as a Grid or StackPanel), to interactivity (such as a Button or TextBox), and everything in between (such as a ListView).

So, how to choose the best control to meet your requirements?

Best Practices

• 🏆 A good rule of thumb is to always use the least complex control possible.
  • For example, there is no need to use a Filter + ListView to show a single UBIK object or property. Instead, you can bind the specific context of that object or property to a xaml control, and everything nested inside will inherit that binding context. This will be explained more in the section on Reusable Templates.
  • Similarly, simple EvalExpressions can in many cases be replaced with Converters.
  • The Visibility attribute can be added to any control. There is no need to wrap any control in a Grid simply to apply a Visibility. The same goes for layouting attributes such as Grid.Row/Column.
• 🏆 When you need to show a collection of items such as ListView, always use our custom versions. These are UBIK-optimized for speed and performance.
  • These are SelectionBoundListView on UWP and SfListViewExt on Xamarin.
  • Avoid using other item controls, or BindableLayouts, unless you are sure the performance impact will be negligible.
• Layouts:
  • If you want to define a specific layout for a page, use a Grid with rows and columns.
  • If things need to be positioned relative to each other, use a StackPanel/StackLayout.
  • When defining Rows/Columns for a Grid, assign as few Auto size as possible, and avoid putting controls of unlimited size in an Auto Row.
  • 🏆 Never nest controls of unrestricted size within controls of unlimited size.
    • To clarify: Some controls resize themselves based on their content and can be of unlimited size. One example is a StackPanel/StackLayout, when compared to a Grid, which is limited to the screen's size. On the other hand, some controls have an unrestricted size, such as ListView, ScrollView, etc.
    • Furthermore: ListViews require a fixed size in order to preserve virtualization.
• Do not nest ScrollViews within other ScrollViews.
  • Note that this includes any control with scrolling behavior, as these include a hidden built-in ScrollView. For example, never place a ListView or TreeView within a ScrollView.
• Nested ListViews involves using a ListView on the item template of an object already presented in a collection. For example, showing the children of a child object.
  • This is especially an issue in Xamarin, both for performance, but also because sfListViewExt tends to cause layouting issues by taking up more space than needed, unlike in UWP where a ListViewExt is capable of calculating its size based on the size of its items. Therefore, when using nested ListViews in Xamarin, constrain the size of the inner ListView with a fixed HeightRequest attribute (or WidthRequest in the case of a horizontal list).
  • 🏆 Alternatives to the optimized ListViews should be used with extreme caution. Controls such as CollectionView or BindableLayout are not optimized for good performance in UBIK.

Using Styles and Templates

Attributes are the properties used to customize the controls in a UI. The number of attributes on each control can also contribute to having 'too much' code. Reducing the number of attributes will improve the overall performance of a customizing, especially on elements that appear multiple times in the UI,s such as items in a list.

Custom templates can be used with the additional benefits of defining a uniform look for all similar elements, and reducing customizing effort by creating a central point where a reusable template can be maintained.

Best Practices

• Do not re-define default attributes.
  • All attributes have a default value. For example, Grid.Row="0" is always true, unless specified. Use the Microsoft documentation to familiarize yourself with the default value for every property, and avoid rewriting them.
  • If your control inherits an attribute from its style, do not rewrite the same attribute again.
    • If you find yourself adding the same attributes to a control with a style, consider moving the attribute to the style definition, or creating a substyle.
• Avoid repeatedly applying Margins to individual controls.
  • The main layouting should not be done through Margins. Instead, try to use a combination of Grid.Row/Column definitions and Horizontal/Vertical alignments to create your layout, instead of applying many or very large Margins.
  • For example, if you want to move every control within your Grid away from the edge, use a Padding on the Grid instead of Margins on each of the elements.
  • If you want to move controls away from each other within the same container, use RowSpacing or ColumnSpacing on the Grid, or Spacing on the Stackpanel.
• 🏆 If you repeatedly define the same attributes on a control, create a style.
  • If the repeated customizing is used in only one xaml, create a ResourceDictionary on the parent container and defining your style there.
  • Otherwise, place your style in UBIKThemes so it can be accessed across the entire project.
  • For more information, read the section on Implicit and Explicit Styling below.
• 🏆 If you repeatedly define the same combinations of controls, use Control/DataTemplates.
  • DataTemplates and ControlTemplates are reusable XAML elements that can be defined once and applied several times throughout the customizing.
  • You may have noticed that a DataTemplate is the basis for an item template in UBIKThemes. However, these can be applied anywhere in the xaml, and do not require a ListView to be rendered.
  • For more information, read the section on Content Templating below.
• 🏆 Reduce the number of elements, especially containers, wherever possible.
  • Layouts are often defined in multiple nested containers, usually Grids and StackPanels. This has an impact on performance if it leads to a very deep hierarchy of rendered elements. On mobile devices with less computational power, the difference can be felt.
  • Creative use of basic controls can sometimes eliminate the need for additional visual elements.
  • Frequent use of Grids or Stackpanels can sometimes be replaced with clever use of Grid.Row/Column definitions.
• Layout Compression:
  • Sometimes it’s unavoidable that multiple containers are needed. In Xamarin, applying the HeadlessLayout style can reduce their impact on the visual tree.
  • Some ideas for reducing the number of nested controls can be seen later in this article.

Implicit and Explicit Styling

A Style is a collection of preset attributes that can be assigned to a XAML control of the same type. When this is done directly, by adding the Style attribute to a control, it is called Explicit Styling. However, styles can also be made Implicit, by not assigning an x:Key, making it a default style. Whether it is the default style for a localized section of a XAML, or the entire project, depends on where the Implicit style is defined.

The following code snippet makes use of several features of XAML Styling:

• The above is an example of a localized ResourceDictionary used to avoid repeatedly customizing similar controls.
• By not assigning an x:Key to the style in the Grid.Resources, it will be used as the Implicit style for all Labels within that StackPanel unless a Style is assigned to them.
  • All Labels within the StackPanel will inherit the defined style, except for "The result is:", which is given an explicit style, overriding the inherited implicit one.
  • If no Explicit style is assigned, the Implicit style will be assigned first, and will be overwritten by any defined attributes, like TextColor in the above example.
• The localized Style definitions in this StackPanel will be passed down to all controls contained within it, no matter how deep the nesting goes.
• The BasedOn attribute can be used to create a sub-style based on another existing style. However, the TargetType must always match.

Similar to styling single controls, presets featuring groups of controls can also be defined in UBIKThemes and used anywhere in the client. The benefit of this

One simple example of this is an ItemTemplate. Project customizers should be familiar with ItemTemplates, which are defined in UBIKThemes and then applied to every item in a List, for example. However, such templates are not inherently connected to listviews, and can be used on any items control, or can even on their own, if the situation calls for it. The important thing to understand is that a content template is a standalone unit, defined in xaml to display particular data bindings, and perhaps react to various states.

Look at other interesting templates in UBIKThemes, such as "Badge" / "ChildCountBadge" in Xamarin, or "UBIKObjectIndicators" in UWP to see more ideas for how templates can be utilized.

Template Selectors

Various parts of the UBIK UI are dynamically swapped in based on specific conditions. One example is the UBIKPropertyDirectItemContainer.xaml, which serves as the base for an item in the property list, and which renders a different type-appropriate editing UI for each kind of property input (such as textbox, selection, datetime, geo coordinates, etc).

The logical tree used by these selectors to render different UIs is documented in our article UBIK Templates.

DataTemplate vs. ControlTemplate

There are two main types of templates that can be used in UBIK to define reusable clusters of controls. Ignoring the technical differences, the functional differences boil down to;

• DataTemplate is used for showing / interacting with various aspects of a data binding.
  • Example 1: Consider a Child ItemTemplate, which is capable of displaying metadata like Title or SubTitle, MetaProperty collections, Classifications, Children and Documents. In this case, the context for the item template is one object, and we can bind to any of its data.
  • Example 2: Consider a Property ItemTemplate, where we can view or edit a metaproperty. In this case, the context of the ItemTemplate would be a single property, and the bindings available would reflect that; we can bind to its Description, Value, DisplayString, Unit, or even its SortedValueRecords, if property change history is activated.
• ControlTemplate is technically used for showing how a specific control can be used; for example, if you want to customize a new template for how a Button should appear. However, it can be used similar to the DataTemplate, with one added bonus; its ContentPresenter sub-control allows for dynamically adding content at every instance, as opposed to a single universal layout that is shared by all.
  • For example: The screenshot below shows three areas navigated to by clicking on root objects. Each has a potentially large collection of their own metaclass of children, meaning that each page benefits from filters, but they do not filter the same properties. However, some details are common, such as the item and filter count texts, and the button to remove all filters.

• • The general layout could be created with two columns, one for the counts and button, with the rest of the space dedicated to the individual filters. The template would then be applied one in each of the child areas, with their specific filters nested inside the ContentView used to display the filter.
  • During runtime, the <ContentPresenter /> defined in the ControlTemplate will be replaced with whatever content is nested in the ContentView.
  • Note that implicit styles can also be added to the ControlTemplate, and will be inherited by any content nested in the ContentView.

Since the ControlTemplate is not technically designed to work directly with data bindings, it does inherit the context from its ContentView by default. However this can be easily fixed by adding the BindingContext="{TemplateBinding BindingContext}" attribute to the root grid of the template.

An understanding of Contexts is fundamental to using templates, as this informs what data bindings are directly available. Some more information can be found at this article on the ContentViewModel

Context Switching

Diminishing the performance should not be the first priority but it also shouldn’t be the last. You should always think about retaining readability and consistency in your code by adding comments and using clear and significant code. But you also have to keep in mind that more code and lines mean more compiling, this can decrease the performance of your whole application. Just try to keep a good balance between these two factors in order to ease the life of customizers. They’ll surely stumble across your code in a few months and will maybe have a hard time to finalize a ten-minute task because they have to find out what every piece of code exactly does. Here are some examples which support the increase of performance.
For example:

• If you use the same resource on more than one XAML file, consider defining it in UBIKThemes (Resources Folder -> LocalState/XAML) rather than on each page.
  
• Don't define UI elements you don't need for composition and use the default control templates whenever possible (these templates have already been tested and verified for load performance).
  
  

Useful links for inefficient XAML code:

• https://www.codemag.com/Article/1509091/XAML-Anti-Patterns-Layout-SNAFUs
  
• https://docs.microsoft.com/en-us/windows/uwp/debug-test-perf/optimize-xaml-loading

Using 'NextLevel' bindings

Performance can be impacted by attempting to show multiple levels of data (ie. child data, from the parent object) outside what is delivered by UBIK by default.

For an in-depth explanation, and guidance on how to implement such functionality safely, please refer to this page Object hierarchy in XAML: NextLevel, ParentLevel, LinkedLevel.

XAML can be sometimes very weird, there are dependencies or default values that you don’t see immediately. So, a good way to prevent millions of fixes for the customer, because the environment, different device or even a different windows version destroys your UI, is to write a test plan where you test your implementation. It’s important to see exactly your controls in action on their own and acting with each other, so you can prevent doing lots of ‘easy’ fixes.