Configuration Files/AppSettings.config
The data and session management service of the web service are configured in this file.
[edit]
CONTENT Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the Microsoft SQL Server connect string to the UBIK® Database. |
| appSettings | UBIK.Service.ValidityPeriod | The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are valid indefinetly. Switch = 0 - cache is always invalid and will get constantly updated. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.LogLevel | To enable logging the LogLevel must be set to Verbose in the Logging.config and also the switch for the LogLevel in the AppSettings.config should be adapted accordingly. Configuration of LogLevel switch in AppSettings.config: Switch = 0 - No logging. Switch = 10 - Simple logging. Switch = 20 - Detailed logging. |
| appSettings | UBIK.Service.TokenRestrictive | Validation of the used Token Configuration of TokenRestrictive: Switch = 0 - the token is not validated. Switch = 1 - data access is only possible after a successfull authentication. |
| appSettings | UBIK.Service.LanguageID | Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. |
| appSettings | UBIK.Service.SessionManagementType | Configuration of the type session management the current service will use: Switch = 0 - Single Local Management. Switch = 1 - USAM Service. |
| appSettings | UBIK.Service.SessionManagementUrl | In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.PushServiceUrl | In the case of SessionManagementType = 1, the URL of the PUSH Service must be configured using this setting..If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod is used for defining the interval for the Rights Evaluator. |
PUSH Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the Microsoft SQL Server connect string to the UBIK® Database. |
| appSettings | UBIK.Service.ValidityPeriod | The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are valid indefinetly. Switch = 0 - cache is always invalid and will get constantly updated. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.LogLevel | To enable logging the LogLevel must be set to Verbose in the Logging.config and also the switch for the LogLevel in the AppSettings.config should be adapted accordingly. Configuration of LogLevel switch in AppSettings.config: Switch = 0 - No logging. Switch = 10 - Simple logging. Switch = 20 - Detailed logging. |
| appSettings | UBIK.Service.TokenRestrictive | Validation of the used Token Configuration of TokenRestrictive: Switch = 0 - the token is not validated. Switch = 1 - data access is only possible after a successfull authentication. |
| appSettings | UBIK.Service.LanguageID | Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. |
| appSettings | UBIK.Service.SessionManagementType | Configuration of the type session management the current service will use: Switch = 0 - Single Local Management. Switch = 1 - USAM Service. |
| appSettings | UBIK.Service.SessionManagementUrl | In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod is used for defining the interval for the Rights Evaluator. |
USAM Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the Microsoft SQL Server connect string to the UBIK® Database. |
| appSettings | UBIK.Service.HideAuthenticationInfo | Authentication information error status Configuration of HideAuthenticationInfo: Switch = 0 - deliver error status if authentication fails. Switch = 1 - hide error status if authentication fails. |
| appSettings | UBIK.Service.ValidityPeriod | Duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are valid indefinetly. Switch = 0 - cache is always invalid and will get constantly updated. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.TokenValidityPeriod | Duration [in seconds] how long a token is valid. For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours). Example Configuration of TokenValidityPeriod: Switch = 60 - token is valid for only 60 seconds. Switch = 3600 - token is valid for 1 hour. |
| appSettings | UBIK.Service.UserRestrictive | Authorization mechanism for user login Configuraion of UserRestrictive: Switch = 0 - every login may connect. Switch = 1 - only known logins may connect to UBIK®. |
| appSettings | UBIK.Service.DeviceRestrictive | Authorization mechanism for device logins Configuraion of DeviceRestrictive: Switch = 0 - every device may connect. Switch = 1- only known and active devices may connect to UBIK®. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod defines the interval for the Rights Evaluator. |
Examples
Example CONTENT
<appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10"/>
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1"/>
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
<!-- In the case of SessionManagementType = 1, the URL of the PUSH Service must be configured using this setting. -->
<add key="UBIK.Service.PushServiceUrl" value="https://myusamserver.mydomain:myport/UBIK/PUSH/UBIKPUSH.svc/SOAP"/>
</appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10"/>
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1"/>
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
<!-- In the case of SessionManagementType = 1, the URL of the PUSH Service must be configured using this setting. -->
<add key="UBIK.Service.PushServiceUrl" value="https://myusamserver.mydomain:myport/UBIK/PUSH/UBIKPUSH.svc/SOAP"/>
</appSettings>
Example PUSH
<appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10"/>
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1"/>
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
</appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10"/>
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1"/>
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
</appSettings>
Example USAM
<appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- Authentication information error status -->
<!-- Switch = 0 - deliver error status if authentication fails / Switch = 1 - hide error status if authentication fails -->
<add key="UBIK.Service.HideAuthenticationInfo" value="1"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0"/>
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="60"/>
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1"/>
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="0"/>
</appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<!-- Authentication information error status -->
<!-- Switch = 0 - deliver error status if authentication fails / Switch = 1 - hide error status if authentication fails -->
<add key="UBIK.Service.HideAuthenticationInfo" value="1"/>
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0"/>
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="60"/>
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1"/>
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="0"/>
</appSettings>
Example CONTENT Windows Azure
Configuration for a Microsoft Azure cloud database and a LAS service.
<appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=tcp:xxxxxxxx.database.windows.net,1433;Initial Catalog=UBIK.MYDATABASE;User ID=myclouduser@xxxxxxxx;Password=mypassword" />
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0" />
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10" />
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1" />
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1" />
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="0" />
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1" />
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP" />
</appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=tcp:xxxxxxxx.database.windows.net,1433;Initial Catalog=UBIK.MYDATABASE;User ID=myclouduser@xxxxxxxx;Password=mypassword" />
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0" />
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10" />
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1" />
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1" />
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="0" />
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="1" />
<!-- In the case of SessionManagementType = 1, the URL of the USAM Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP" />
</appSettings>
Example CONTENT Windows Authentication
Integrated security.
<appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Integrated Security=SSPI;" />
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0" />
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10" />
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1" />
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1" />
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="0" />
<!-- Authentication information error status -->
<!-- Switch = 0 - deliver error status if authentication fails / Switch = 1 - hide error status if authentication fails -->
<add key="UBIK.Service.HideAuthenticationInfo" value"1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="0" />
<!-- In the case of SessionManagementType = 1, the URL of the PUSH Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="" />
</appSettings>
<!-- Configuration of the Microsoft SQL Server connect string to the UBIK® Database -->
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Integrated Security=SSPI;" />
<!-- The duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. -->
<!-- Switch = "-1" - cached objects are valid indefinetly / Switch = "0" - cache is always invalid and will get constantly updated / Switch = "+1" - cached objects are checked every 1+ seconds -->
<add key="UBIK.Service.ValidityPeriod" value="0" />
<!-- Duration [in seconds] how long a token is valid. -->
<!-- For security reasons, it is recommended that the token validity should be set for short periode with a maximum of 86400 seconds (24 hours) -->
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<!-- Switch = "0" - No logging / Switch = "10" - Simple logging / Switch = "20" - Detailed logging -->
<!-- To enble logging the LogLevel must be set to Verbose in the Logging.config. -->
<add key="UBIK.Service.LogLevel" value="10" />
<!-- Authorization mechanism for user logins -->
<!-- Switch = 0 - every login may connect / Switch = 1 - only known logins may connect to UBIK® -->
<add key="UBIK.Service.UserRestrictive" value="1" />
<!-- Authorization mechanism for device logins -->
<!-- Switch = 0 - every device may connect / Switch = 1- only known and active devices may connect to UBIK® -->
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<!-- Validation of the used Token -->
<!-- Switch = "0" - the token is not validated / Switch = "1" - data access is only possible after a successfull authentication -->
<add key="UBIK.Service.TokenRestrictive" value="1" />
<!-- Configuration of the LanguageID that is used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. -->
<add key="UBIK.Service.LanguageID" value="0" />
<!-- Authentication information error status -->
<!-- Switch = 0 - deliver error status if authentication fails / Switch = 1 - hide error status if authentication fails -->
<add key="UBIK.Service.HideAuthenticationInfo" value"1"/>
<!-- Configuration of the type session management the current service will use -->
<!-- Switch = "0" - Single Local Management / Switch = "1" - USAM Service -->
<add key="UBIK.Service.SessionManagementType" value="0" />
<!-- In the case of SessionManagementType = 1, the URL of the PUSH Service must be configured using this setting. -->
<add key="UBIK.Service.SessionManagementUrl" value="" />
</appSettings>
 | The port number myport must be specified only if other than 443. |
