Last modified on 5 June 2014, at 07:26

Configure Single Local Application Authentication

Revision as of 07:26, 5 June 2014 by KNO (Talk | contribs) (Created page with "A Single Local Application can be configured in the following way: <ol> <li>Open {{UBIKSTUDIO}} and connect to the database which should be c...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A Single Local Application can be configured in the following way:

  1. Open UBIKSTUDIO and connect to the database which should be configured for Single Local Application.
  2. Open database specific settings and set
    3. Parameter Value Comment
    SessionManagementType 0 0 = Single Local Management, 1 = LAS, 2 = GAS
    SessionServiceUrl - Address of the authentication service
    TokenValityPeriode 300 Duration (in seconds) every generated token is valid. The token expires after this timespan.
    HideAuthenticationInfo 1 This switch provides the possibility to turn off the detailed error information as necessary (due to security issues).
  1. Open the web.config of the data service and check values of the session's management type and URL.
    2.   <appSettings>
        ...
        <add key="UBIK.Service.TokenValityPeriode" value="600" />
        <add key="UBIK.Service.SessionManagementType" value="0" />
        <add key="UBIK.Service.SessionManagementUrl" value="" />
        <add key="UBIK.Service.HideAuthenticationInfo" value="0" />
        ...
      </appSettings>