The data and session management service of the web service are configured in this file.
[edit]
CONTENT Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the SQL connect string to the UBIK® Database |
| appSettings | UBIK.Service.ValidityPeriod | Duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are always valid. Switch = 0 - cache is always invalid and always checks the objects. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.LogLevel | To activate the Service logging, the LogLevel setting should be switched to Verbose in the Logging.config and also the switch for the LogLevel in the AppSettings.config should be adapted accordingly. Configuration of LogLevel switch in AppSettings.config: Switch = 0 - No logging. Switch = 10 - Simple logging. Switch = 20 - Detailed logging. |
| appSettings | UBIK.Service.TokenRestrictive | Validation of the used Token Configuration of TokenRestrictive: Switch = 0 - the token is not validated. Switch = 1 - data access is only possible after a successfull authentication. |
| appSettings | UBIK.Service.LanguageID | ID of the language that must be used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. Example Configuration of LanguageID: Switch = 0 - German. Switch = 1 - English. |
| appSettings | UBIK.Service.SessionManagementType | Configuration of the type session management the current service should use: Switch = 0 - Single Local Management. Switch = 1 - USAM Service |
| appSettings | UBIK.Service.SessionManagementUrl | In the case of SessionManagementType Switch is set to 1, the URL of the USAM Service must be configured using this setting. If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.PushServiceUrl | In the case of SessionManagementType Switch is set to 1, the URL of the PUSH Service can be configured using this setting.If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod is used for defining the interval for the Rights Evaluator. |
PUSH Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the SQL connect string to the UBIK® Database |
| appSettings | UBIK.Service.ValidityPeriod | Duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are always valid. Switch = 0 - cache is always invalid and always checks the objects. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.TokenRestrictive | Configuration of TokenRestrictive: Switch = 0 - the token is not validated. Switch = 1 - data access is only possible after a successfull authentication. |
| appSettings | UBIK.Service.LogLevel | To activate The Service logging, the LogLevel setting should be switched to Verbose in the Logging.config and also the switch for the LogLevel in the AppSettings.config should be adapted accordingly. Configuration of LogLevel switch in AppSettings.config: Switch 0 - No logging. Switch 10 - Simple logging. Switch 20 - Detailed logging. |
| appSettings | UBIK.Service.LanguageID | ID of the language that must be used by the Web Service. The Service will deliver the content of MultiLanguage Properties in this language. Example Configuration of LanguageID: Switch = 0 - German. Switch = 1 - English. |
| appSettings | UBIK.Service.SessionManagementType | Configuration of the type session management the current service should use: Switch = 0 - Single Local Management. Switch = 1 - USAM Service |
| appSettings | UBIK.Service.SessionManagementUrl | In the case of SessionManagementType Switch is set to 1, the URL of the USAM Service must be configured using this setting. If a port other than 443 (default port for https) is used, it has to be specified here as well. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod is used for defining the interval for the Rights Evaluator. |
USAM Settings
| Area | Setting | Description |
|---|---|---|
| appSettings | UBIK.DataBase.ConnectionString | Configuration of the SQL connect string to the UBIK® Database |
| appSettings | UBIK.Service.HideAuthenticationInfo | Configuration of HideAuthenticationInfo: Switch = 0 - deliver error status if authentication fails. Switch = 1 - hide error status if authentication fails. |
| appSettings | UBIK.Service.ValidityPeriod | Duration [in seconds] until a cached record is marked as outdated in the UBIK® Kernel. Configuration of ValidityPeriod: Switch = -1 - cached objects are always valid. Switch = 0 - cache is always invalid and always checks the objects. Switch = +1 - cached objects are checked every 1+ seconds. |
| appSettings | UBIK.Service.TokenValidityPeriod | Duration [in seconds] how long a token should be valid. For security reasons, it is recommended that the token validity should be set for short periods with a maximum of 24 Hours or 86400 seconds. Example Configuration of TokenValidityPeriod: Switch = 0 - token is indefinitely valid. Switch = 60 - token is valid for only 60 seconds. Switch = 3600 - token is valid for 1 hour. |
| appSettings | UBIK.Service.UserRestrictive | Configuraion of UserRestrictive: Switch = 0 - every login may connect. Switch = 1 - only known logins may connect to UBIK®. |
| appSettings | UBIK.Service.DeviceRestrictive | Configuraion of DeviceRestrictive: Switch = 0 - every device may connect. Switch = 1- only known and active devices may connect to UBIK®. |
| appSettings | UBIK.Service.GroupRightsUpdateIntervall | GroupRightsUpdateIntervall setting is optional. Update Interval [in seconds] for the Group Rights Evaluator. If this setting is not configured, the ValidityPeriod defines the interval for the Rights Evaluator. |
Examples
Example CONTENT
<appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<add key="UBIK.Service.LogLevel" value="10"/>
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<add key="UBIK.Service.LanguageID" value="1"/>
<add key="UBIK.Service.SessionManagementType" value="1"/>
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
<add key="UBIK.Service.PushServiceUrl" value="https://myusamserver.mydomain:myport/UBIK/PUSH/UBIKPUSH.svc/SOAP"/>
</appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<add key="UBIK.Service.LogLevel" value="10"/>
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<add key="UBIK.Service.LanguageID" value="1"/>
<add key="UBIK.Service.SessionManagementType" value="1"/>
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
<add key="UBIK.Service.PushServiceUrl" value="https://myusamserver.mydomain:myport/UBIK/PUSH/UBIKPUSH.svc/SOAP"/>
</appSettings>
Example PUSH
<appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<add key="UBIK.Service.LogLevel" value="10"/>
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<add key="UBIK.Service.LanguageID" value="1"/>
<add key="UBIK.Service.SessionManagementType" value="1"/>
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
</appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain,1433;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.ValidityPeriod" value="300"/>
<add key="UBIK.Service.LogLevel" value="10"/>
<add key="UBIK.Service.TokenRestrictive" value="1"/>
<add key="UBIK.Service.LanguageID" value="1"/>
<add key="UBIK.Service.SessionManagementType" value="1"/>
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP"/>
</appSettings>
Example USAM
<appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.HideAuthenticationInfo" value="1"/>
<add key="UBIK.Service.ValidityPeriod" value="0"/>
<add key="UBIK.Service.TokenValidityPeriod" value="60"/>
<add key="UBIK.Service.UserRestrictive" value="1"/>
<add key="UBIK.Service.DeviceRestrictive" value="0"/>
</appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Persist Security Info=True;User ID=myuser;Password=mypassword"/>
<add key="UBIK.Service.HideAuthenticationInfo" value="1"/>
<add key="UBIK.Service.ValidityPeriod" value="0"/>
<add key="UBIK.Service.TokenValidityPeriod" value="60"/>
<add key="UBIK.Service.UserRestrictive" value="1"/>
<add key="UBIK.Service.DeviceRestrictive" value="0"/>
</appSettings>
Example CONTENT Windows Azure
Configuration for a Microsoft Azure cloud database and a LAS service.
<appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=tcp:xxxxxxxx.database.windows.net,1433;Initial Catalog=UBIK.MYDATABASE;User ID=myclouduser@xxxxxxxx;Password=mypassword" />
<add key="UBIK.Service.ValidityPeriod" value="0" />
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<add key="UBIK.Service.LogLevel" value="10" />
<add key="UBIK.Service.UserRestrictive" value="1" />
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<add key="UBIK.Service.TokenRestrictive" value="1" />
<add key="UBIK.Service.LanguageID" value="0" />
<add key="UBIK.Service.SessionManagementType" value="1" />
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP" />
</appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=tcp:xxxxxxxx.database.windows.net,1433;Initial Catalog=UBIK.MYDATABASE;User ID=myclouduser@xxxxxxxx;Password=mypassword" />
<add key="UBIK.Service.ValidityPeriod" value="0" />
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<add key="UBIK.Service.LogLevel" value="10" />
<add key="UBIK.Service.UserRestrictive" value="1" />
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<add key="UBIK.Service.TokenRestrictive" value="1" />
<add key="UBIK.Service.LanguageID" value="0" />
<add key="UBIK.Service.SessionManagementType" value="1" />
<add key="UBIK.Service.SessionManagementUrl" value="https://myusamserver.mydomain:myport/UBIK/USAM/USAM.svc/SOAP" />
</appSettings>
Example CONTENT Windows Authentication
Integrated security.
<appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Integrated Security=SSPI;" />
<add key="UBIK.Service.ValidityPeriod" value="0" />
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<add key="UBIK.Service.LogLevel" value="10" />
<add key="UBIK.Service.UserRestrictive" value="1" />
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<add key="UBIK.Service.TokenRestrictive" value="1" />
<add key="UBIK.Service.LanguageID" value="0" />
<add key="UBIK.Service.HideAuthenticationInfo" value"1"/>
<add key="UBIK.Service.SessionManagementType" value="0" />
<add key="UBIK.Service.SessionManagementUrl" value="" />
</appSettings>
<add key="UBIK.DataBase.ConnectionString" value="Data Source=ubikdbserver.mydomain;Initial Catalog=UBIK.MYDATABASE;Integrated Security=SSPI;" />
<add key="UBIK.Service.ValidityPeriod" value="0" />
<add key="UBIK.Service.TokenValidityPeriod" value="300" />
<add key="UBIK.Service.LogLevel" value="10" />
<add key="UBIK.Service.UserRestrictive" value="1" />
<add key="UBIK.Service.DeviceRestrictive" value="1" />
<add key="UBIK.Service.TokenRestrictive" value="1" />
<add key="UBIK.Service.LanguageID" value="0" />
<add key="UBIK.Service.HideAuthenticationInfo" value"1"/>
<add key="UBIK.Service.SessionManagementType" value="0" />
<add key="UBIK.Service.SessionManagementUrl" value="" />
</appSettings>
 | The port number myport must be specified only if other than 443. |