Jump to: navigation, search

Difference between revisions of "Configuration File Example"

(→‎client)
(→‎system.serviceModel)
Line 70: Line 70:
 
In this section the web services are configured:
 
In this section the web services are configured:
 
* Behaviours for services and endpoints
 
* Behaviours for services and endpoints
−
* Bindings (provides different configurations for data services and endpoints specified by the name which then is used in the service/client configuration). See [http://msdn.microsoft.com/en-us/library/ms733099%28v=vs.110%29.aspx Details] for further information and [http://msdn.microsoft.com/en-us/library/hh924831%28v=vs.110%29.aspx Configuring Timeout Values on a Binding] for information about Timeout configuration.
 
−
* Services (used for the data service and the session management service)
 
−
* Clients (the client definition is used by the data service to connect to the session management service defined in the appSettings)
 
−
:The client's endpoint addresses are ignored as they are replaced by the settings provided in appSettings at service runtime!
 
  
 
==== behaviors ====
 
==== behaviors ====

Revision as of 14:26, 12 May 2015

All the configuration files (UBIK.Studio.exe.config, UBIK.EnterpriseService.exe.config, web.config) have to comply with syntax and other guidelines as given in Configuring Apps by using Configuration Files.

For the configuration file web.config of the Web Service see the Configuring Services for further information.

General

These sections will be found in all of the configuration files.

configSection

In the configSection tag service specific configurations can be defined. These settings include logging and exception handling in the UBIK® web service. This tag should not be changed in general.

  <configSections>
    <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" />
    <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" />
  </configSections>

exceptionHandling

In this tag the settings for exception handling can be specified.

  <exceptionHandling>
    <exceptionPolicies>
      <add name="System.Exception">
        <exceptionTypes>
          <add name="All Exceptions" type="System.Exception, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
           postHandlingAction="None">
            <exceptionHandlers>
              <add name="System.Exception" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
               logCategory="EXCEPTION" eventId="100" severity="Error" title="System.Exception"
               formatterType="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.TextExceptionFormatter, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
               priority="0" />
            </exceptionHandlers>
          </add>
        </exceptionTypes>
      </add>
    </exceptionPolicies>
  </exceptionHandling>

runtime

Runtime specific configurations can be defined, as for example the probing path for plugins.

        <runtime>
                <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
                        <probing privatePath="lib;Injection"/>
                        <dependentAssembly>
                                <assemblyIdentity name="Xceed.Wpf.Themes.Metro" publicKeyToken="ba83ff368b7563c6" culture="neutral"/>
                                <bindingRedirect oldVersion="0.0.0.0-2.4.14475.10340" newVersion="2.4.14475.10340"/>
                        </dependentAssembly>
                        <dependentAssembly>
                                <assemblyIdentity name="Xceed.Wpf.Themes" publicKeyToken="ba83ff368b7563c6" culture="neutral"/>
                                <bindingRedirect oldVersion="0.0.0.0-2.4.14475.10340" newVersion="2.4.14475.10340"/>
                        </dependentAssembly>
                        <dependentAssembly>
                                <assemblyIdentity name="Xceed.Wpf.Toolkit" publicKeyToken="ba83ff368b7563c6" culture="neutral"/>
                                <bindingRedirect oldVersion="0.0.0.0-2.4.14475.10340" newVersion="2.4.14475.10340"/>
                        </dependentAssembly>
                        <dependentAssembly>
                                <assemblyIdentity name="Xceed.Wpf.ListBox" publicKeyToken="ba83ff368b7563c6" culture="neutral"/>
                                <bindingRedirect oldVersion="0.0.0.0-2.4.14475.10340" newVersion="2.4.14475.10340"/>
                        </dependentAssembly>
                        <dependentAssembly>
                                <assemblyIdentity name="Xceed.Wpf.Themes.Office2007" publicKeyToken="ba83ff368b7563c6" culture="neutral"/>
                                <bindingRedirect oldVersion="0.0.0.0-2.4.14475.10340" newVersion="2.4.14475.10340"/>
                        </dependentAssembly>
                </assemblyBinding>
        </runtime>

system.serviceModel

In this section the web services are configured:

  • Behaviours for services and endpoints

behaviors

<system.serviceModel>
  <behaviors>
    <serviceBehaviors>
      <behavior name="httpBehavior">
        <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment -->
        <serviceMetadata httpsGetEnabled="true"/>
        <!-- To receive exception details in faults for debugging purposes, set the value below to true.  Set to false before deployment to avoid disclosing exception information -->
        <serviceDebug includeExceptionDetailInFaults="true"/>
      </behavior>
    </serviceBehaviors>
    <endpointBehaviors>
      <behavior name="httpBehavior">
        <webHttp/>
      </behavior>
    </endpointBehaviors>
  </behaviors>
  ...
</system.serviceModel>

services

<system.serviceModel>
  ...
  <serviceHostingEnvironment multipleSiteBindingsEnabled="true" minFreeMemoryPercentageToActivateService="0"/>
  <services>
    <service name="UBIK.Service.UBIKContent" behaviorConfiguration="httpBehavior">
      <endpoint address="" behaviorConfiguration="httpBehavior" binding="webHttpBinding" bindingConfiguration="WebHttpBinding_UBIKContent" contract="UBIK.Service.IUBIKContent"/>
      <endpoint address="/SOAP" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_UBIKContent" contract="UBIK.Service.IUBIKContent"/>
    </service>
    <service name="UBIK.Service.USAM" behaviorConfiguration="httpBehavior">
      <endpoint address="" binding="webHttpBinding" behaviorConfiguration="httpBehavior" bindingConfiguration="WebHttpBinding_UBIKContent" contract="UBIK.Service.IUSAM"/>
      <endpoint address="/SOAP" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IUSAM" contract="UBIK.Service.IUSAM"/>
    </service>
  </services>
  ...
</system.serviceModel>

See also

Retrieved from "https://wiki.augmensys.com/index.php?title=Configuration_File_Example&oldid=15359"